How to connect a car-mounted water dispenser to a household power supply?
Industry News
Release time:2023-06-29 17:27
Author:
[Summary Description] First, connect the aviation connector of the power cable to the D‑type port on the host unit. Next, route the power cable along the door‑side cable management channel to beneath the dashboard, locate the wiring opening that connects the interior to the vehicle’s front end, pass it through, and lead it to the location of the vehicle’s battery.
1. First, connect the aviation connector of the power cord to the D‑type interface on the host unit.
2. Next, route the power cable along the door‑side wiring channel to beneath the instrument panel. Locate the wire opening inside the cabin that connects to the vehicle’s front end, pass the cable through it, and run it to the location of the vehicle’s battery.
3. Finally, route the power cable along the inner side of the vehicle’s front panel and secure it with cable ties. For safety, do not connect the power cable to the vehicle’s electrical or fuel systems. Cut the power cable to an appropriate length, exposing approximately 5 mm of bare wire on each conductor. That concludes the procedure for connecting a car‑mounted water dispenser to a household power supply.
Related Information
